Delivering efficiency and comfort in spaces where it matters most.
75F’s suite of smart sensors gives building owners the power of IoT-connected devices for optimal efficiency and comfort in spaces where it matters most. Our wide range of sensors continuously monitor and provide data and visibility across your building and equipment in order to optimize your environment for efficiency, comfort, productivity and well being.
Measure to manage with the 75F Local Interface Sensor, a room sensor and user interface that takes highly accurate readings of temperature, humidity, and light. This device can be extended to control HVAC equipment when connected to backend interfaces such as the 75F Hyper Stat or Smart Stat.
The Local Interface Sensor uses Bluetooth for provisioning and communicates with the 75F® Central Control Unit™ using a 900 Mhz wireless mesh network.
MECHANICAL | ||
Dimensions |
73.95mm depth x 95.63mm circumference x 9.21mm plate depth |
|
Screen |
128 x 128 pixel OLED display, touch interface in outer ring |
|
Mounting |
(1) toggle bolt (requires 32mm hole in wall) |
|
Operating Temp |
Operating Environment: 0°F – 122°F |
|
Termination |
4 pin connector |
|
Accuracy |
Humidity (typical +/- 2% RH), temperature (typical +/- 0.2C) |
COMMUNICATIONS | ||
Bluetooth |
Bluetooth for provisioning |
|
Wired |
4 wire interface for power and communication |
ELECTRICAL | ||
Power |
6.5V DC provided by Smart Node via 4 wire interface |
The 75F Wall Sensor is a high-precision temperature and humidity sensor that pairs with the 75F Smart Node to deliver data that influences equipment control. This device can be daisy chained with other sensors on the 1-wire bus to provide an extensible sensor network. A Wall Sensor paired with a 75F® Smart Node™ results in a clean aesthetic in your space while minimizing installation times.
MECHANICAL | ||
Dimensions |
59.6mm circumference x 5.6mm surface depth x 64.5mm total length x 26mm backplate height |
|
Mounting |
(1) toggle bolt, requires 1” hole in drywall |
|
Operating Temp |
Operating Environment: 0°F – 122° |
|
Termination |
3 pin connector |
|
Accuracy |
Humidity (typical +/- 2% RH), temperature (typical +/- 0.2C) |
COMMUNICATIONS | ||
Wired |
3 wire interface for power and communication; proprietary 1 wire protocol to communicate with a master device |
ELECTRICAL | ||
Power |
6.5V DC provided by Smart Node via 3 pin connectors |
The 75F Wall Sensor adds a high precision temperature and humidity sensor that is pre calibrated from the factory. The Wall Sensor is easily mounted on a wall by a single toggle bolt. The white version comes without the ring for a more minimalistic look.
MECHANICAL | ||
Dimensions |
32.6mm circumference x 5.6mm surface depth x 64.5mm total length x 26mm backplate height |
|
Mounting |
(1) toggle bolt, requires 1” hole in drywall |
|
Operating Temp |
Operating Environment: 0°F – 122° |
|
Termination |
3 pin connector |
|
Accuracy |
Humidity (typical +/- 2% RH), temperature (typical +/- 0.2C) |
COMMUNICATIONS | ||
Wired |
3 wire interface for power and communication; proprietary 1 wire protocol to communicate with a master device |
ELECTRICAL | ||
Power |
6.5V DC provided by Smart Node via 3 pin connectors |
The 75F® Ceiling Sensor™ offers high-precision measurement pre-calibrated from the factory for measuring comfort factors of temperature and humidity in wide open spaces or zones without room for a wall-mounted sensor.
The 75F Ceiling Sensor mounts easily to the ceiling with a threaded bush and is adjustable with a set screw, making temperature and humidity readings not only possible in airy spaces, but accurate, too.
MECHANICAL | ||
Dimensions |
48mm body length, 28mm max body height, 45mm male bush length, 32mm male bush max height , 20’ included wire, 8” extender for drop adjustments |
|
Mounting |
(1) threaded bush, requires 15mm hole in ceiling tile |
|
Operating Temp |
Operating environment: 0 ̊F – 122 ̊F |
|
Termination | 3 pin connector | |
Accuracy | Humidity (typical +/- 2% RH), temperature (typical +/- 0.2C) |
COMMUNICATIONS | ||
Wired |
Proprietary 1-wire protocol to communicate with master devices |
ELECTRICAL | ||
Power |
6.5V DC provided by Smart Node via 3 pin connectors |
Where your HVAC application requires air duct enthalpy values, the 75F Duct Sensor is an effortless and high-value solution. This factory pre-calibrated sensor provides high-precision temperature and humidity readings to a master device, such as 75F’s Smart Node in the Outside Air Optimization application. Easily mount the Duct Sensor to your rooftop unit duct with self-drilling screws – even for an exposed duct, this low-impact aesthetic device will look modern and unobtrusive in your space.
MECHANICAL | ||
Dimensions |
Back plate: 64mm x 7mm Pipe: 36mm x 10.6mm diameter |
|
Mounting |
Self-drilling screws, requires 1/2" hole in duct |
|
Operating Temp |
Operating Environment: 0 ̊F – 122 ̊F |
|
Termination |
3 pin connector |
|
Accuracy |
Humidity (typical +/- 2% RH), temperature (typical +/- 0.2C) |
COMMUNICATIONS | ||
Wired |
3 wire interface for power and communication; proprietary 1 wire protocol to communicate with a master device |
ELECTRICAL | ||
Power |
6.5V DC provided by Smart Node via 3 pin connectors |
The Flush Sensor provides accurate temperature and humidity values from your space to the Smart Node, which reports these values to the 75F® Central Control Unit™ (CCU) for zone monitoring and control. This sleek device mounts to a wall or metal beam duct with self-drilling screws – saving you time and money on installation. Unlike a Wall Sensor it does not involve drilling a hole for the mounting or running the wiring behind the surface. A Flush Sensor paired with a 75F® Smart Node™ results in a clean aesthetic in your space while minimizing installation times.
MECHANICAL | ||
Dimensions |
Back plate: 64mm x 10.5mmFront plate: 39.93mm x 7.95mm |
|
Mounting |
Self-drilling screws |
|
Operating Temp |
Operating Environment: 0˚F - 122˚F |
|
Termination |
3 pin connector |
|
Accuracy |
Humidity (typical +/- 2% RH), temperature (typical +/- 0.2C) |
COMMUNICATIONS | ||
Wired |
3 wire interface for power and communication; proprietary 1 wire protocol to communicate with a master device |
ELECTRICAL | ||
Power |
6.5V DC provided by Smart Node via 3 pin connectors |
[fa icon="phone"] US: 888.590.8995
[fa icon="phone"]US Support: 888.612.7575
[fa icon="phone"] India: 1800.121.4575